Husqvarna 562 XP® Mark II Chainsaw
£983.18 (Inc VAT) - incl. VAT
4 in stock
High-performance 60 cc petrol chainsaw engineered for professional hardwood forestry. The high-rev X-Torq® engine provides the power needed for felling, limbing and bucking large conifers and hardwoods while the slim, low body improves handling. AutoTune 3.0 with Simple Start Technology keeps starting reliable and engine performance optimised in varying conditions. The saw can be used with guide bars up to 70 cm (≈28 in) and is supplied with an 18″ SN C85 guide bar and chain.
High cutting capacity
The redesigned engine delivers sustained power for demanding cuts, making the saw effective for long cuts and productive operation in hardwoods.
Ability to carry longer bars
Robust bar mount, sturdy crankcase and reliable chain oiling allow use of longer guide bars up to the recommended 70 cm (≈28 in) for greater reach and increased throughput.
Slimmed-down handling
Low, slender saw body and an optimised layout make the unit easier to manoeuvre in tight spots and when working at height or in dense stands.
Key specification
| Article ID | 970663518 |
| Power output | 3.5 kW |
| Cylinder displacement | 59.8 cm³ |
| Weight | 5.9 kg |
| Bar / blade / cutting length | 45 cm |
| Fuel tank | 0.65 l |
Full specification
| Weight (excl. cutting equipment) | 5.9 kg |
| Product size height | 29 cm |
| Product size length | 45 cm |
| Product size width | 23 cm |
| Cylinder displacement (metric) | 59.8 cm³ |
| Output shaft power (metric) | 3.5 kW |
| Fuel tank volume (metric) | 0.65 l |
| Fuel Consumption | 445 g/kWh |
| Idling speed | 2800 rpm |
| Clutch engagement speed (±120) | 4100 rpm |
| Spark Plug | NGK CMR6H |
| Exhaust emissions (CO₂ EU V) | 778 g/kWh |
| Sound pressure level at operators ear (LpA) | 107 dB(A) |
| Sound power level, guaranteed (LWA) | 118 dB(A) |
| Packaging length | 470 mm |
| Packaging width | 340 mm |
| Packaging height | 250 mm |
| WEEE Classified | No |
| Equivalent vibration level (ahv, eq) rear handle | 4.5 m/s² |
| Chain speed at max power (m/s) (metric) | 21.4 m/s |
| Power/fuel type | Gasoline |
| Recommended bar length, min (metric) | 38 cm |
| Recommended bar length, max (metric) | 70 cm |
| Equivalent vibration level (ahv, eq) front handle | 4.0 m/s² |
| Chain pitch | 3/8″ |
| Chain type | C85 |
| Bar length (metric) | 45 cm |
| Bar length (inch) | 18 in |
| Spikes | Mounted |
| Nose type | Sprocket nose |
| Ignition module air gap (metric) | 0.3 mm |
| Cylinder stroke (metric) | 36 mm |
| Chainsaw sub-group | Full time professional use chainsaws |
| Ignition module air gap (imperial) | 0.01 in |
| Cylinder stroke (imperial) | 1.42 in |
Key features
High cutting capacity
New engine design offers plenty of grunt for peak performance even during longer cuts. The high cutting capacity makes the saw ideal for productive operation – even when using a longer guide bar.
Ability to carry longer bars
The powerful engine in combination with the large bar mount, a sturdy crankcase and sufficient chain oiling provides an ability to carry longer bars.
Slimmed-down design
Low, slender saw body makes the chainsaw easy and convenient to handle in any situation.
Always optimized
Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges. No need for manual carburetor adjustment.
X-Torq® engine
The X-Torq® engine design increases torque over a wider rpm range providing maximum cutting power.
Optimized saw body
No protruding parts, a smooth underside, rounded starter cover and well-protected controls all make the saw easy to handle.
Air Injection filters 98% of incoming dust
Give you full working days with maintained performance and less wear on the engine.
Felling sight to last a lifetime
Perfect sight is critical when felling – so we made one that will outlast the chainsaw itself.
Magnetic filter protects the engine
A magnetic filter inside the fuel hose effectively prevents metal particles from reaching the carburetor and engine, which minimizes wear and interruptions.
Retained bar nuts
The retaining function prevents loosing the bar nuts.
Low vibrations
Husqvarna’s anti vibration system efficiently separates your hands from the vibrations generated by the engine and the cutting equipment. This is to protect your body but also to reduce the fatigue in your arms and hands and in the end of the day contribute to make your workday more productive.
Quick and easy adjustment
Chain tension should be checked regularily during use. The saw comes with a side-mounted chain tensioner that makes adjustment quick and easy.
Flip up tank caps
Easy to open and secure firmly, even when wearing thick winter gloves.
Retained starter screws
The retaining function prevents losing the screws holding the starter.
Made for professional use
Engineered for professional use, offering power, performance and durability for demanding tasks.
Features
Product video
FAQs
How many CC is a Husqvarna 562 XP® Mark II?
The Husqvarna 562 XP® Mark II has an engine displacement of 60 cubic centimeters (CC).
How much does a Husqvarna 562 XP® Mark II weigh?
5.9 kg excl. cutting equipment
Is a Husqvarna 562 XP® Mark II a Pro saw?
Yes, the Husqvarna 562 XP G Mark II is a professional chainsaw in the 500-series. Built for demanding forestry and tree care work. It features a powerful 60cc X-Torq® engine, AutoTune™ 3.0, and heated handles for comfort in cold conditions. With high cutting capacity, advanced filtration, and a slim, ergonomic design, it’s made for durability and control in tough environments.
What bar lengths can I use with the 562 XP® Mark II?
The saw is designed to work with guide bars from approximately 38 cm up to the recommended maximum of 70 cm (≈28 in). It is supplied with an 18″ (45 cm) SN C85 bar and chain fitted. When fitting longer bars, check mounting, chain oiling and adjust cutting technique as required.
How does AutoTune 3.0 help in the field?
AutoTune 3.0 continuously optimises the engine settings for consistent performance and reliable starting in different conditions. That means you won’t need to make manual carburettor adjustments and the saw will maintain good running characteristics across variations in fuel quality, temperature and operating conditions.
What routine checks and PPE do you recommend before use?
Before each shift check chain tension (side-mounted tensioner), chain lubrication, fuel level and that bar nuts/starter screws are retained. Inspect the air filter and magnetic fuel filter for contaminants. Use appropriate PPE: chainsaw trousers, gloves, helmet with face shield, and hearing protection — the sound pressure level at the operator’s ear is 107 dB(A).
Additional information
| Weight | 7.705 g |
|---|---|
| UPC|EAN | 7333377337923 |
