Husqvarna Strimmer attachment

Fitment can vary by model and deck size. Send us your mower model (and deck size if applicable) and we’ll confirm compatibility before you order.

Some accessories require a mounting kit or specific brackets depending on your machine. If you’re unsure, ask us and we’ll advise the correct setup.

Yes — if you’d like installation, let us know when ordering and we can arrange fitting (collection, workshop fit, or on-site depending on the product).

This brushcutter attachment is supplied for use with compatible Husqvarna combi units listed for the Multi 255-4 blade. Confirm fitment for your model; common compatible models include 324LDX, 327LDX, 327RDX, 525LK and 525RK. Check the product page or your operator manual for definitive compatibility.

Fitment uses the standard combi attachment coupling on your Husqvarna combi shaft. With the engine/starter disabled and spark plug or battery isolated, remove any current attachment, locate the combi coupling, slide the brushcutter attachment into place and secure as per the combi unit instructions. Fit the J-handle and harness, check all fasteners and test at low speed before full use. Refer to the operator manual for torque settings and detailed steps.

After use, clear debris from the knife and guard and inspect for damage or excessive wear. Replace the blade if chipped or worn beyond safe limits and replace the guard if cracked. Check mounting fasteners regularly and tighten if needed. Store the attachment dry and inspect the harness and handle for wear before each season.