Husqvarna Weed brush

Name: Husqvarna Weed brush
SKU: 597750801
Availability: OutOfStock

SKU: 597750801 Category: MOWER ACCESSORIES

£6,067.18 (Inc VAT) - incl. VAT

Contact for availability 01423 780319 enquiries@jtodd.co.uk

Description
Additional information

Practical, heavy-duty steel brush for removing weeds and cleaning gutters, kerb stones and other hard surfaces. The brush head has stepless angle adjustment to reduce wear, increase contact pressure or handle cambers. Complete with dirt guard and suitable for left- and right-side driving. Requires hydraulic and counterweight kit. Key measured data: working width 80 cm, brush diameter 500 mm, tyre size 200 mm, drive via PTO shaft.

Efficient weed and debris removal

Steel bristles clear vegetation and detritus from paving joints and hard surfaces quickly, making routine maintenance and larger clearances more effective.

Stepless angle adjustment

Adjust the head continuously between 0° (left) and 25° (right) to set the contact pressure you need. Use the angle to compensate cambers and to manage brush wear.

Designed for gutters and kerbs

Low-profile design and fitted dirt guard let you work close to gutters and kerb stones without excessive fouling, and the unit is configured for both left- and right-side driving.

Key specification

Article ID	597750801
Fits	P 520DX, P 525DX, P 525DX WITH CABIN, P 535HX
GTIN/EAN	7392930306868

Full specification

Working width (metric)	80 cm
Drive System	PTO shaft
Angle adjustment, left	0 °
Angle adjustment, right	25 °
Angle adjustment steps	Stepless
Diameter mm (metric)	500 mm
Tyre size (metric)	200 mm

FAQs

Will this fit my machine?

Fitment can vary by model and deck size. Send us your mower model (and deck size if applicable) and we’ll confirm compatibility before you order.

Do I need any extra brackets or fitting kits?

Some accessories require a mounting kit or specific brackets depending on your machine. If you’re unsure, ask us and we’ll advise the correct setup.

Can you fit it for me?

Yes — if you’d like installation, let us know when ordering and we can arrange fitting (collection, workshop fit, or on-site depending on the product).

Do I need any additional kits to fit the weed brush?

Yes. The attachment requires a hydraulic kit and a counterweight kit to function correctly and maintain machine balance. Fitment is best carried out by an installer familiar with front-mounted attachments.

What surfaces and width does the brush cover?

It is intended for hard surfaces — paving, kerbs, gutters and similar. Working width is 80 cm and the brush diameter is 500 mm.

How is the angle adjusted and can it work both sides?

The head has stepless angle adjustment from 0° (left) to 25° (right), allowing you to alter contact pressure and compensate for cambers. The unit is designed to operate for both left- and right-side driving and is driven via a PTO shaft.

Additional information

Weight	157.000 g
UPC\|EAN	7392930306868